Automatic Dryer
Model:ENA-120CA
Multi-function Dry and Safety
- Clearly identified LED control panel provides setting of 15 drying strikes, allowing for accurate management of drying operation.
- With using advanced technology heater and unique designed blower, allowing for accurate management of drying operation.
- The inverter controls blower's start and speed and automaticchecking intelligent blower rotation control system, when air exhausting has backpressure in checking, the rotation speed of blower would be automatic revised, won’t be controlled by air exhausting backpressure to influence the drying.
- Easily clean side cotton screen, big door diameter,clean easily.<Can draw out from the rear side for clean>
- 12.7mm square holes, the opening percentage of the internal barrel reaches 64%, increasing ventilation efficiency, higher drying speed.
- Advection hot air design, let more hot air blow the linen, do not waste the hot air, effecting the drying time shortest.
- 6 agitating rods have a good agitating result, reduce bed sheet tangling or the rubs between bed sheet and internal barrel that lower the cotton wool and extend the linen lives.
- 1425mm large internal barrel permits linen fully unfolding for drying, with using rotation control of drum, preventing linen from unevenly drying or tangling.
- Unique drum operation control, preventing linen from crushing or tangling. If the bath towel has much water, the rotating speed will be low; if there is little water, the rotating speed will be fast. Half-drying bed sheet, quilt cover etc., the clockwise rotation is slow,counterclockwise rotation is fast.
- Can with output convey belt, save carrying time, improve working efficiency.
- SPECIFICATIONS
Mode |
ENA-120CA |
||||
Loading(kg) |
120kg |
Total capacity |
9.7kw |
||
Distill speed |
220 kg/hr |
Pipe | Steam |
2" |
|
Steam consumption |
400 kg/hr |
Cooling water |
1 1/2" |
||
Drum |
Diameter(mm) |
1,425mm |
Air |
3/8" |
|
Depth(mm) |
1,708mm |
Required steam pressure |
7.0 kg/cm2 |
||
Capacity(Liter) |
2,722L |
Air consumption |
35NL/Time |
||
R.P.M |
clockwise 29rpm |
Duct pipe |
Φ600mm or 3,000cm2 |
||
Punch hole |
12.7mm square |
Power supply |
3ph 220v/380v 50/60Hz |
||
Air flow |
200 m3/min |
Distributed electricity |
14mm2/8mm2 |
||
Door dimension | Front |
1,100 × 500mm |
Maximum current |
36A / 22A |
|
Rear |
Φ1,337mm |
Breaker |
75A / 50A |
||
Controlled by |
Touch Panel |
Dimension |
2075W × 2970D × 2905H |
||
Motors | Drum motor |
2.2kw × 4P |
Net weight |
2,150kg |
|
Blower |
7.5kw × 4P |
The material inner container |
Baked paint |